Name: 304L Stainless Steel Coil
SKU: 0

+86 18954208811

Call Now !

info@hwdsteel.com

Email Now ！

GET A QUOTE

product


Location: Home > Products > Stainless steel > Stainless steel coil > 304L Stainless Steel Coil


304L Stainless Steel Coil

304L stainless steel coil is a low-carbon variation of the classic 304 austenitic chromium-nickel stainless steel, supplied in continuous coil form. The reduced carbon content (≤0.030%) minimizes carbide precipitation during welding, making it particularly suitable for welded components where post-weld annealing is not feasible. It offers excellent forming characteristics and good overall corrosion resistance.

Phone：+86 18954208811

Email：info@hwdsteel.com

WhatsApp：+86 18954208811

Add：Keda Xunfei Weilaigang Building, No. 1 Jiangshan South Road, Huangdao District, Qingdao City, Shandong Province

Inquire Now

◉ PRODUCT SPECIFICATION

1. Standard Designations

UNS: S30403
ASTM: A240/A240M
EURONORM: 1.4307
JIS: SUS 304L
GB/T: 022Cr19Ni10

2. Chemical Composition (% by weight)

Element	C	Si	Mn	P	S	Cr	Ni
Min	-	-	-	-	-	18.0	8.0
Max	0.030	0.75	2.00	0.045	0.030	20.0	12.0

3. Mechanical Properties (Annealed Condition)

Property	Yield Strength	Tensile Strength	Elongation	Hardness
Value	≥170 MPa	≥485 MPa	≥40%	≤201 HB

4. Corrosion Resistance

General Corrosion: Excellent resistance to a wide range of atmospheric environments and corrosive media
Intergranular Corrosion: Superior resistance in welded condition compared to 304
Oxidation Resistance: Good resistance to oxidizing acids
PREN Value: ~19

5. Physical Properties

Property	Value
Density	8.0 g/cm³
Melting Range	1399-1454°C
Thermal Conductivity	16.2 W/m·K (100°C)
Thermal Expansion	17.2 × 10⁻⁶/K (20-100°C)
Modulus of Elasticity	193 GPa

6. Available Product Range (Coil)

Parameter	Specification
Thickness	0.3mm - 6.0mm
Width	600mm - 2000mm
Coil ID	508mm / 610mm
Coil OD	1000mm - 1500mm
Temper	Annealed, 1/4H, 1/2H, 3/4H, Full Hard

7. Surface Finishes

2B: Standard smooth matte finish (most common)
BA: Bright annealed mirror finish
No. 4: Brushed/satin finish
2D: Dull matte finish
No. 8: Mirror polish

8. Typical Applications

Food and beverage processing equipment
Kitchen equipment and appliances
Architectural applications
Chemical containers
Pharmaceutical equipment
Automotive trim components
Heat exchangers

◉ Surfcae selection

SURFACE	CHARACTERISTIC	SUMMARY OF MANUFACTURING METHOD	APPLICATION
NO.1	Silvery white	Hot rolled to specified thickness	Do not need to have a glossy surface use
NO.1	lackluster	Hot rolled to specified thickness	Do not need to have a glossy surface use
NO.2D	Silvery white	After cold rolling, heat treatment and pickling are carried out	General material, deep material
NO.2B	Gloss is stronger than No.2D	After No.2D treatment, the final light cold rolling is carried out through the polishing roller	The general material
BA	As bright as a sixpence	No standard, but usually a bright annealed surface with high reflectivity.	Building materials, kitchen utensils
NO.3	Rough lapping	Grind with 100~200# (unit) strop tape	Building materials, kitchen utensils
NO.4	Intermediate grinding	Polished surface obtained by grinding with 150~180# strop abrasive tape	Building materials, kitchen utensils
NO.240	Fine lapping	Grinding with 240# strop abrasive tape	kitchenware
NO.320	Very fine grinding	Grinding was carried out with 320# strop abrasive tape	kitchenware
NO.400	The luster is close to BA	Use 400# polishing wheel to grind	General timber, building timber, kitchen appliances
HL	Hairline grinding	Suitable particle material for hair stripe grinding (150~240#) with many grains	Building, construction material
NO.7	It's close to mirror grinding	Use a 600# rotary polishing wheel to grind	For art or decoration
NO.8	Mirror ultrafinish	The mirror is ground with a polishing wheel	Reflector, for decoration